Featured Articles

AMD sheds light on stacked DRAM APUs

AMD sheds light on stacked DRAM APUs

AMD is fast tracking stacked DRAM deployment and a new presentation leaked by the company  points to APUs with stacked DRAM,…

More...
Nvidia officially launches the 8-inch Shield Tablet

Nvidia officially launches the 8-inch Shield Tablet

As expected and reported earlier, Nvidia has now officially announced its newest Shield device, the new 8-inch Shield Tablet. While the…

More...
Intel launches new mobile Haswell and Bay Trail parts

Intel launches new mobile Haswell and Bay Trail parts

Intel has introduced seven new Haswell mobile parts and four Bay Trail SoC chips, but most of them are merely clock…

More...
Aerocool Dead Silence reviewed

Aerocool Dead Silence reviewed

Aerocool is well known for its gamer cases with aggressive styling. However, the Dead Silence chassis offers consumers a new choice,…

More...
AMD A8-7600 Kaveri APU reviewed

AMD A8-7600 Kaveri APU reviewed

Today we'll take a closer look at AMD's A8-7600 APU Kaveri APU, more specifically we'll examine the GPU performance you can…

More...
Frontpage Slideshow | Copyright © 2006-2010 orks, a business unit of Nuevvo Webware Ltd.
Tuesday, 15 April 2014 13:37

IHS teardown reveals Galaxy S5 BOM

Written by Nermin Hajdarbegovic

$256, priciest Galaxy S to date

Research firm IHS got hold of Samsung’s new flagship smartphone and took it apart to the last bolt to figure out how much it actually costs to build. According to the teardown, the Galaxy S5 has a bill of material (BOM) of $256. 

Of course, this is not the full cost of the device, as it does not cover logistics, R&D, marketing and a range of other expenses that Samsung has to cover before the device makes it to retail.

 

Galaxy S5 BOM higher than usual

 

The $256 figure sounds a tad too high. Most flagship phones tend to have a BOM of about $200 or less. Most iPhones usually end up south of $200. For example, the iPhone 5S had a BOM of $191 when it launched last September, while the iPhone 5C had $173 worth of components inside its unapologetically plastic body. 

galaxys5-teardown

Image: IHS

The Galaxy S5 retails for $699. Samsung does not have as much room to jack up margins as Apple does on the iPhone 5S, but it still has quite a bit more than many manufacturers. What’s more, Samsung’s BOM keeps going up. IHS found that the Galaxy S3 had a BOM of $205, while the S4 ended up at $233 (LTE version with Qualcomm 600 SoC). On top of that, a Galaxy S series phone costs upwards of $8 to assemble.

High-end smartphones are pricey, but at least it’s nice to see that Samsung’s consumers get a bit more value for money with each new generation.

 

Display remains the priciest component

 

Unsurprisingly Samsung’s 5-inch 1080p display is the most expensive component in the Galaxy S5. IHS puts its cost at $65. The cost of DRAM and NAND memory is around $33, but it’s unclear how much the Snapdragon 801 SoC costs. IHS puts the price of the Snapdragon 600 used in the S4 at $20, while the big Exynos 5 was estimated to cost $30. The Snapdragon 801 is probably closer to the Exynos in terms of overall cost.

“Inside we see mostly a lot of recycled components that we’ve seen before. There’s really nothing special inside where Samsung is pushing the envelope,” IHS analyst Andrew Rassweiler told Re/code. “There’s no breakthroughs, there’s nothing earth-shattering. It’s really just a continuation of what has come before.”

However, although there are no breakthroughs, the Galaxy S5 features a few new sensors, including a $4 fingerprint sensor and a biosensor from Maxium, with an estimated cost of $1.45. In addition to the new components which were not used in previous Galaxy S phones, the S5 also features a somewhat sturdier body, which also happens to be waterproof. This probably added a few more bucks to the BOM. 

 

 

Last modified on Tuesday, 15 April 2014 13:48
blog comments powered by Disqus

 

Facebook activity

Latest Commented Articles

Recent Comments