Print this page
Published in Reviews

XFX GTX 280 at 670MHz tested

by on08 July 2008

Image

Review: GTX 280's single GPU gets a boost

 

XFX was kind enough to send us two of their most powerful single-GPUs based on GT200 core. We know them as GTX 280 and GTX 260, but it’s their price and performance that made sure we don’t forget them.  The cards themselves didn’t change since the launch, but the price did, and we’re talking about a price drop of over €100 for GTX 280. The new price adjustments made GTX 280 much more affordable for an end user, and if you want the fastest GPU around – look no further than this baby. Of course, if you want even more speed then XFX’s offering might better suit your needs, and today we’re talking about XFX GF GTX 280 670M 1GB GDDR3 DUAL DVI TV PCI-E XXX.

670M in the card’s name suggests the core speed of 670MHz. XFX did a core overclock of almost 70MHz whereas the shaders got a boost from reference 1296MHz and now run at 1458MHz. The next picture shows a dual slot XFX 670M XXX card with reference cooling. The cooler performs well but it’s a bit too loud for our taste. The temperatures on the overclocked card went up to 86 degrees Celsius.

Image

GTX 280 has a 1GB frame buffer and uses 512bit memory interface coupled with a fast GDDR3 memory running at 2214MHz. XFX has taken this a step further so the memory on their GTX 280 card runs at 2500MHz. So, the memory bandwidth also got a boost from 140GiB to about 160GiB.

XFX did a nice paintjob on their card, and you can see the silhouette of a wolf in the background. The back of the card also got a nice make-up job, so it’s worth taking a look at it.

Image

Nvidia stuck to 65nm process with their GT200 chip and its 240 stream processors, and they managed to pack as much as 1400 million transistors to a surface of almost 600mm2. That’s how this chip got a title of the largest single GPU ever made. Compared to the G80, GT200 has more than twice the number of transistors, where most of them are used to improve the GPU’s computing capabilities. Compared to the last generation, GT200 brings more threads, stream processors, better shading and texturing and more memory and memory bandwidth.

Image

240 stream processors are connected to 32 ROPs, which are further connected to the 512bit memory interface. Here we have 8 ROP partitions, each packing 4 ROP units (8 x 4 = 32 ROPs), where each ROP partition has a 64bit connection to the main memory. 8 ROP partitions x64bit interface results in 512bit memory interface. GTX 260 (the weaker GT200 GPU) has 7 ROP partitions with the same 64bit memory interface per partition, which tells us that GTX 260 has a 448 bit memory interface. GTX 260 has 896MB of GDDR3 and 192 stream processors.

Each ROP partition on GT200 GPU is capable of processing 4 pixels per clock. Although they packed 6 ROP partitions the previous Geforce 8 and 9 generations are also capable of 4 pixels per clock. Just like this example of ROPs on GT200, we’ve got much evidence that indicate how GT200 is in many ways a greatly improved and enhanced G80 setup. Compared to last generation’s 128, the number of 240 stream processors is the best indicator of sheer power that GT200 GPU packs.

Image

A view from above once again shows that this is a dual slot design, and towards the end of the card we see the two power connectors. You’ll need a 6pin and 8pin connectors to power this card. Maximum consumption is 236W in the worst case scenario. However, if you’re not using 3D (and have an appropriate chipset), HybridPower technology kicks in and powers down the card passing the task of rendering to the integrated graphics on your motherboard. GT200 can also power down the transistors that are not needed in a given moment and dynamically regulate frequencies and voltages. The card needs only 25W in idle mode whereas HD content viewing will need only 35W. We’re of course talking about pure 2D where the card’s frequencies are also downclocked to 300/100/200MHz (core, shaders, memory).

The card has a PCIe 2.0 interface but no DX 10.1 support. Still, DX 10.1 isn’t that important because it’s still not put to good use, but we might see some apps that’ll require it. GTX 200, as well as G80 and G92 based cards, feature PhysX support that helps the GPU with physics acceleration, but we currently don’t have any games to try it out. In order to use GPU’s PhysX acceleration you’ll need PhysX drivers. For now we can play with Tri SLI support, but three GTX 280 cards are not a cheap pleasure. Two SLI connectors are well hidden on the top of the card, so you can leave them there until they’re needed.

Image

Nvidia thinks it’s quite important to portray GT200 (as well as G80 and G92) as a multifunctional architecture locked and loaded for more than just gaming. We see them use the phrase “beyond gaming” more and more often, and it should mean that we can use this card for many other tasks thanks to Compute Unified Device Architecture (CUDA). Using CUDA, we communicate with the GPU that feeds back the processed data. It’s probably closer to a multifunctional GPU than many think, but we’ll wait until we see the results.

Until then, we can do some gaming, and XFX ships a nice gift with their card – a full version of the game Assassin’s Creed.

Image

In the box you’ll also find a SPDIF cable needed to route sound through an HDMI cable. You’ll also need a DVI-to-HDMI dongle that XFX doesn’t ship with their cards. I/O side features two dual link DVI-I with HDCP and one HDTV out.

Image

The box features the same motif we’ve seen on XFX 670M XXX card.

Image



 

Testbed:

Motherboard:
EVGA 680i SLI (Provided by EVGA)

Processor:
Intel Core 2 Duo 6800 Extreme edition (Provided by Intel)

Memory:
OCZ FlexXLC PC2 9200 5-5-5-18  (Provided by OCZ)
        during testing CL5-5-5-15-CR2T 1066MHz at 2.2V

PSU:
OCZ Silencer 750 Quad Black (Provided by OCZ)

Hard disk:
Seagate Barracuda 7200.9 80GB SATA (Provided by Seagate)

CPU-Cooler:
Freezer 7 Pro (Provided by Artic Cooling)

Case Fans:
Artic Cooling - Artic Fan 12 PWM
Artic Cooling - Artic Fan 8 PWM

Futuremark

Image

Image

3DMark Vantage shows a bigger score difference than the older Mark06. XFX 670M XX is 6% faster than Gainward’s reference card and it beats HD 4870 by 28%. Mark06 reports performance difference of only 4%.



Gaming


Image

Something went wrong with ATI HD 4870 in this game, and reinstalling the drivers didn’t help. XFX scored almost 100% better than HD 48070 at 1280x1024 4xAA and 8xAF, whereas it beat the reference Gainward by 5%. Gainward outperformed the HD 4870 by 90%.

Call of Juarez restores HD 4870’s dignity and it ran nicely. It even managed to beat the reference GT280 by up to 12%, but it ran evenly with 670M. XFX 670M ran up to 11% better than reference GTX280.

Image

Image

Crysis was demanding as always so we see that resolution 1600x1200 with 4xAA and 8xAF results in playable number of frames, but not enough to brag about. The exception is XFX 670M XXX that was the fastest and scored 35fps, whereas it beat HD 4870 by 29%.

Image

In F.E.A.R., upping the resolution sees HD 4870 losing its pace, so Gainward GTX 280 emerges as a winner with a 24% better result. XFX tops that so we see no less than 108fps at 2048x1536 4xAA 8xAF. That result is 11% better than reference Gainward’s card and 38% better than HD 4870.

Image

Much like the previous game, GTX 280 shows the greatest advantage at the highest tested resolution. This time Gainward beats Radeon HD 4870 by about 23%, but XFX again tops that and beats it by about 29%. Once again, overclocking proves to be a nice tool, and XFX GTX 280 670M XXX vouches for that by beating the reference Gainward GTX 280 by 5%.

Image

At 16x12 with AA and AF, GTX 280 is faster by 24% but at 2048x1536 that advantage sinks to 13%. XFX GTX 280 670M takes the crown by beating Gainward by almost 12% and HD 4870 by almost 27% at the highest tested resolution.

Image

With Radeon 4870 you won’t be comfortably gaming at rarely used resolutions such as 2048x1536, but 1600x1200 will prove to be nice.  Gainward GTX 280 scores a playable framerate at all the resolutions and performs up to 20% better than Radeon HD 4870.

Our overclocked champ provided that extra something, so it outperforms the reference GTX 280 by about 7% at the highest resolution.

 

 

Conclusion

XFX did a good job overclocking the GTX 280 card and we see that it paid off. The core is overclocked from reference 602MHz to 670MHz whereas the shaders got a boost from 1296MHz to 1485MHz. The card packs 1GB of GDDR3 memory, which should be enough for any current or soon to launch game. The new GT200 graphics processor is bursting with power and XFX’s overclock helped in pleasant gaming in all the gaming tests.

It’s time to replace the old, but still popular, Geforce 8800 GTX cards. Luckily, after the initial price shock, we can find GTX 280 priced at around €400. XFX will be a bit more expensive, but if you want the best – then pay for it. Besides, we can’t forget that you also get Assassin’s Creed as a gift.

This overclock definitely makes this card stand up.

Last modified on 08 July 2008
Rate this item
(0 votes)