Published in Reviews

Cosmos S case from Cooler Master tested

by on28 May 2008

Index


ImageImage

Review: Reinforced with aluminum bars

 

Cosmos S is one of the latest and greatest cases that hit the market lately, and we dissected one of these to show you its pros and cons. We really liked it, and by the end of this review, you’ll more or less get a clear idea of whether it’s worth getting such a case.

It comes in a huge box, so don’t be surprised when you actually buy it, and the box is 32 cm wide, 66cm high and 72cm long. The case itself is smaller, of course, and it’s 26.6cm wide, 59.8cm high and 65.2cm long. A glance at the dimensions reveals that this is a full-tower case.

The case is made of aluminum and it weighs 13.8 kg, whereas gross weight is 17.8kg. The case is wrapped in Styrofoam and is ia nice bag with the CoolerMaster logo, so the case will be well protected, and you’ll get it literally without a scratch.

Image

The box is nicely designed with enough info to know what you’re purchasing, but the real pleasure comes after you take Cosmos S out of its box.

Image

Styrofoam keeps the case stable within the box, so it doesn't get damaged in transport.

ImageImage
ImageImage

Cosmos S, also called RC-1100 by CoolerMaster, is quite easy to move, lift and even turn upside down despite its size. All this is easy, thanks to aluminum bars on top and bottom of the case, so we just pulled on them to get the case out of the box.

Cosmos S is one stable case, and if it was a car, we’d say that sharp turns are a breeze for this beast. The above mentioned bars come in handy, and since we’re using Cosmos S as reference case for testing CPU coolers, we often have to lay it down on the side to mount coolers. If there wasn’t for the bars, the case would probably be scratched and damaged by now.

Image Image
Image Image

The front features ten 5-¼’’ bays for optical drives, but three are already taken up by modules for placing hard disks. If you’re confused, don’t worry, everything will be clear soon.

This next picture shows Cosmos S after a couple of weeks of use, and you can see the hard-disk module in the middle (4-5-6 bays), that we placed in the case afterwards, whereas the first bay houses an optical drive.

Image

One of the stylish details on Cosmos S is ON/OFF button, which requires no effort to push – all it takes is a gentle touch and the system will start.

Image

You can see that everything is nicely secured, so that it doesn’t get dirty or damaged before use. Right behind the ON/OFF button you’ll find an easily accessible USB panel. Beside the four USB ports, you’ll also find microphone in, headphones, firewire and eSATA ports. If you don’t like getting dust in your ports, you can easily slide the plastic cover shut.

Image

The top of the case houses 120mm case fans well hidden under the grill.

Image

With the case, you’ll get one top case fan, but there's room for two more. You’ll have to take the top panel off to mount them, and a screw on the back panel will take care of that.

Image

The back panel says a lot about the internal layout, and you can see that the PSU is on the bottom of the case, and that there’s another 120mm fan in the back. CoolerMaster also left options for those who might want water cooling, so there are two outlets for pipes above the rear fan. To the left and right of these outlets are the latches that open the side-panels.

Image

PSU is not included with the case, and what you get is three 120mm fans and one 200mm one on the side of the case. The following picture shows how a populated back panel looks. There’s a motherboard, two XFX 9800 GX2 cards and Cooler Master 1000M (modular 1000 Watt) PSU.

Image 

After opening the left side-panel, (the one where the motherboard and other components are) you get a chance to see the large 200mm fan which, like the other two fans, uses 3-pin connectors. This means that the fan’s RPM can’t be regulated. Apart from the 3-pin connectors, all fans come with a standard peripheral power plug (molex) adapter, so you can hook them up directly to the 4-pin molex on your PSU. In order to monitor their speed, we recommend you use a 3-pin connector and hook them up directly to your motherboard.

Image

Image

Removing the side-panels gives access to all the components. Setting up the cables is child’s play, as long as you route the cables to the back, so that branching them out is easier. With a little effort, you can arrange the cables nicely, although in our case it’s not exactly a work of art. In case that 24-pin power or 8-pin CPU connectors are too short to be routed from the back, you can use the included extensions for 24- and 8-pin connectors.

Image

The bottom panel features a filter, that’s quite easy to take off and wash, and it’s positioned underneath the bottom case fan. A filter was provided for the PSU, too, and you should probably check up on that one more often. Here we see that the aluminum bars really come in handy, and you can lay this case sideways with no fear of damaging it.

Image



Prev Next »

Last modified on 04 June 2008
Rate this item
(0 votes)