Published in Reviews

Cooltek Ultimate Case reviewed

by on22 November 2010


CUC isn’t lacking in details but it does seem somewhat “plasticky” and thus gives the impression of being cheap. It’s made of 0.8mm steel and plenty of plastic. The case measures 210 x 525 x 560mm (W x H x L).


Side panels are made of steel but the front and top panels as well as the extrusions on the side panels are made of plastic. Of course, considering the price this is quite understandable. Cooltek sacrificed steel in order not to skimp on accessories and features – and we’re all for that course of action as long as the functional aspect is improved or at least left intact.


The front panel houses five 5.25’’ bays, first two of which have movable lids. This is of course purely for aesthetic reasons.



Mounting optical drives requires you to take the front panel off – a simple tug on the bottom will do. On top of the panel you’ll find a blue LED.


The red stripes are made of fine mesh. Of course, the 5.25’’ bays are entirely closed but the mesh that holds Cooltek logo acts as an air inlet. Behind it is a thin dust filter protecting the 12cm blue LED fan.



Control panel is neatly placed and packs plenty of connectors.


The control panel houses four keys for turning preinstalled fans on and off. The fans run at fixed RPM and they’re quiet; all the fans except the one on the rear panel have a blue LED. The fans as well as the control panel keys come with 2-pin connectors.

The panel has no hot-swap nor USB 3.0 connectors but it does come with one SATA power and one SATA data cable that can be used to connect SATA devices. Cooltek again seems to have thought of everything and ships the aforementioned cables with the case.

The panel also houses one eSATA connector and four USB 2.0 connectors between. USB connectors are nicely spaced apart and you’ll find plenty of space for those thick USB sticks. Same goes for audio connectors. The final touch is the All-in-One card reader and the plastic cover which can be used to prevent the control panel from getting dusty.


Behind the control panel is the red mesh again, hiding two 120mm fans. Cooltek used dust filters on top of the case as well.



Top panel blue LED fans are fixed to the construction whereas the control panel is a part of the hood that covers the top of the case.


The left panel (picture below) has a plastic handle and also comes with a dust filter. However, Cooltek obviously didn’t intend to use a fan here.


Cooltek made a special mechanism for opening the panels, making sure that the panel doesn’t open even when not fixed with screws. Pressing the mechanism and a light tug will make the side panel come off easily.


Same procedure is valid for the right side panel.


We’ve already shown you few pictures showing the rear of the case, where you can see 7 expansion slots. The PSU is on the bottom of the case. Unfortunately, we lost the rubber cap that’s supposed to cover the water-cooling holes.


The case uses rubber feet which help with reducing vibration noise and keep the case less than 1cm off the ground.

Last modified on 23 November 2010
Rate this item
(11 votes)

Read more about: