×

Warning

JUser: :_load: Unable to load user with ID: 83

Published in Reviews

Cooler Master Hyper TX3 tested

by on25 December 2009

Index


Image

Review: Great alternative to reference CPU coolers





We recently got the chance to review the Hyper TX3, yet another cooler from CoolerMaster's line of affordable CPU cooling solutions. This cooler is priced somewhere between €15 and €20, but the icing on the cake is the fact that it supports new Intel Core i5 and i3 processors.

Image

Packaging


Hyper TX3 comes in standard clear plastic packaging, so you can take a closer look at it and see whether it's what you need. Since this is a budget cooling solution, the packaging has been designed accordingly, which is certainly a nice move because paying for packaging when buying coolers has no merits whatsoever.

Image

The packaging features some information on the main characteristics. The front of the "box" lists supported processors whereas the rear is reserved for specs.

Image

The box holds the cooler, the fan, user's manual, mounting mechanisms for AMD (754/939/940/AM2/AM2+ ) and Intel (LGA775 i LGA 1156) sockets, screws, thermal paste and brackets for the two fans.

Image


A closer look


The heatsink is made of aluminum whereas the heatpipe and the base are made of copper. We must admit that compared to the rest of CoolerMaster's offer, our today's sample is pretty small in comparison. Judging by size alone, it's easy to conclude that you can't expect miracles from this cooler, but Hyper TX3 will be a more than good alternative to Intel's reference CPU coolers.

Image

Image

The heatsink measures 90mm x 51mm x 139mm and the fan measures 92mm x 92mm x 25mm.

Image

Hyper TX3 features three heatpipes branching out from the base and going towards the top of the cooler, passing through the aluminum cooling fins.

Image

Hyper TX3 comes with one fan, but it's Tower design and two identical sides on the heatsink allow for mounting two 92mm fans, just in case better performance is what you're after.

Image

Hyper TX3 uses 4-pin PWM fan running at 800-2800 rpm. This means that the fan will dynamically alter the rpm count depending on the needs of the actual rig. Manufacturer's specs say noise levels range from 17 to 35 dBA and the fan life is at 40.000 hours. Maximum rmp unfortunately makes quite a bit of noise, but it's still nowhere near to what Intel's reference cooler does when maxed.

Image

The fan's inner edges rest on the heatsink and are coated in rubber, in order not to introduce noise during operation.

Image

The cooler's base is comprised of an aluminum plate and copper heatpipes, placed in a way to provide direct contact with the CPU. 

Image


Image

TX3 supports Intel's LGA775 and LGA 1156 Sockets, as well as AMD's Sockets (Socket 754/939/940/AM2/AM2+). CoolerMaster lists a hefty number of supported CPUs: Core™ i5 / Core™ i3 / Core™2 Extreme / Core™2 Quad / Core™2 Duo / Pentium / Celeron, kao i AMD procesore Phenom™ II X4 / Phenom™ II X3 / Phenom™ II X2 / Phenom™ X4 / Phenom™ X3 / Athlon™ II X4 / Athlon™ II X3 / Athlon™ II X2 / Athlon™ X2 / Athlon™ / Sempron™.

It's well worth noting that this is CoolerMaster's first cooler that's fully compatible with Intel's socket 1156.

The Hyper TX3 weighs in at 470 grams, although it might seem much lighter when carried. CoolerMaster uses a simple push-pin mechanism for Intel's sockets, which is fastened with screws to the aluminum part of the base. 

Image

For AMD's sockets, the TX3 uses the standard mechanism.

Image

Image




Prev Next »

Last modified on 25 December 2009
Rate this item
(1 Vote)