Fudzilla
April 16, 2014, 07:16:17 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Fudzilla Forum is open
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Intel Conroe 1333MHz FSB Pencil Mod  (Read 3614 times)
Jon
Global Moderator
Full Member
*****
Posts: 234


swallow your pride.

audiofreak39@gmail.com AuDioFreaK39
View Profile WWW Email
« on: March 05, 2008, 05:57:43 AM »

I'm not sure how many of you have seen this before.  It was posted back in June, but it's a very simple and clever mod to get a Conroe running at a 1333MHz FSB straight from the BIOS.  I thought it was interesting, and I'd like to see how it compares against the native 1333MHz FSB Wolfdales and Penryns that are yet to be released.

http://www.ocforums.com/showthread.php?s=e2e29739e8a741a41425747d33fe7419&t=499340

=======================================================

Original Thread Below:

Posted by:  Kunaak - OCForums.com
June 6, 2007, 02:38 AM


got bored tonight and was looking around at VR forums and came across a old pic Shamino posted awhile back and thought... why not give it a shot...

so I took one of my spare conroes, and got my conductive ink pen, did the mod, let it dry, took my PC apart and popped this in... and it almost worked.

it booted at 1333, then I rebooted, and it went back to 1066... and was jumping back and forth.
so I took the CPU out, and saw, I didnt have a nice clean connection between the two BSEL pads... so I traced over it again, and let it dry, blah blah blah...

10 minutes later... it works.
now, it's working just fine.

boots up everytime at 7 x 333.

no big deal really since I know this CPU can do over 590, but its still fun to have a higher default FSB for the hell of it.

I wanted to see if this works, so I could try it on my quad core CPU...
hoping theres a slim chance in hell, that if it boots at 1333, the chipset strap will be looser, and give me some extra OC room.
thats a 1-100 shot... but if I never do it, how can I say it wont work??

atleast this one worked.

what would be kinda interesting, is if you took a E4300, and did this mod to it, assuming you knew the CPU could do 3 ghz, it would boot up at 9 x 333 for 3 ghz.
that would be pretty cool for those cheap boards that been coming out at Frys and such, with the CPU.

anyways, next try is to make my Quad Core do the same thing...
not really holding my breath on it, but its worth a shot.

heres the boot up speed I got from CPUZ after the mod.

http://valid.x86-secret.com/show_oc?id=165085

total down time, about 20-30 minutes, to take it apart, do the mod, let it dry and put it back together.

last note...
before doing this kinda mod, make sure you have a bios on your board that will allow a 1333 FSB CPU to be used in that board.

Logged

Core i7 Extreme 965 {} EVGA X58 SLI Classified Limited Edition{} 6GB Mushkin XP Series DDR3 1600MHz 7-8-7-20 {} EVGA GeForce GTX 295 Plus [Quad-SLI] {} Thermalright TRUE Copper
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!