Four options, ranging from $159 to $189

Good news for water cooling enthusiasts - EK Water Blocks has just listed four EK-FC295 GeForce GTX 295 water block models in the US market which are now available with pricing ranging from $159 to $189 respectively. Each block is prepared for two 5mm LED diodes and ready for SLI, meaning that fittings can be used on both sides of the blocks (up and down).

First up is the standard plexiglass model (EK-FC295 GTX SLI) for $159, with a base made of electrolytic copper measuring 214 x 115 x 8mm and with a middle portion made of acrylic glass. The acrylic top measures 171 x 115 x 8mm.



Next is the Acetal model (EK-FC295 GTX SLI-AC) for $169.95, with a base made of electrolytic copper measuring 214 x 115 x 8mm and with a middle portion made of acrylic glass. The acrylic top measures 171 x 117 x 8mm, roughly 2mm wider than the standard model.



Third is the Nickel model (EK-FC295 GTX SLI-NK) for $179.95, with a base made of nickel-plated electrolytic copper measuring 214 x 115 x 8mm and with a middle portion made of acrylic glass. The acrylic top measures 171 x 115 x 8mm.



Last but definitely not least is the Nickel/Acetal model (EK-FC295 GTX SLI-NK/AC) for $189.95, with the base made of nickel-plated electrolytic copper measuring 214 x 115 x 8mm and with a middle portion made of acrylic glass. The acrylic top measures 171 x 117 x 8mm, roughly 2mm wider than the standard model.



In addition, EK has provided a general installation manual for all four EK-FC295 models which can be found here